Image

Why Your Inverter Trips Frequently — Solutions That Work

Introduction

Does your inverter suddenly switch off and on again?
Does it trip when you plug in certain appliances?
Does it shut down under load or during PHCN/generator changeover?

Frequent inverter tripping is a major sign that something is wrong with your solar or electrical installation.

In this guide, Solarzone Nigeria explains why your inverter trips frequently and how to fix it permanently.

1️⃣ Overload (Most Common Cause)

Your inverter has a maximum load it can carry.
If the connected appliances exceed its capacity, it will trip.

❌ Common overload culprits:

  • AC

  • freezer

  • microwave

  • pressing iron

  • electric kettle

  • pumping machine

  • blender

  • washing machine

✔ Fix:

  • reduce load

  • remove heavy appliances

  • upgrade your inverter capacity

📌 If your inverter trips when AC or freezer starts → overload + surge issue.

2️⃣ Weak or Failing Batteries

Weak batteries cause:

  • voltage drop

  • low backup

  • inverter tripping under small load

❌ Signs:

  • inverter trips at night

  • runs only 30–60 minutes

  • battery charges slowly

  • battery voltage drops quickly

✔ Fix:

  • test battery

  • replace old/weak batteries

  • upgrade to lithium

Weak batteries are one of the top reasons for tripping.

3️⃣ Low Battery Voltage

When battery voltage drops below safe level, inverter shuts down.

❌ Causes:

  • cloudy weather

  • insufficient solar panels

  • high nighttime load

  • wrong inverter settings

  • weak battery

✔ Fix:

  • add more panels

  • adjust charging settings

  • reduce evening load

  • upgrade battery capacity

4️⃣ Wrong Inverter Settings

If configured incorrectly, the inverter may trip due to:

  • wrong battery type

  • low voltage cutoff

  • incorrect AC input mode

  • wrong charging current

  • wrong frequency

✔ Fix:

Let Solarzone reprogram:
✔ battery mode
✔ AC priority
✔ cutoff voltage
✔ bulk/float voltage

Proper settings = stable performance.

5️⃣ Faulty or Undersized Wiring

Thin or burnt wires cause:
❌ voltage drop
❌ heat
❌ tripping
❌ inverter damage

✔ Fix:

  • use correct cable sizes

  • replace burnt wiring

  • tighten all terminals

Solar systems need thick cables for AC & DC lines.

6️⃣ Faulty MPPT/Charge Controller

If MPPT is faulty:

  • battery won’t charge properly

  • inverter runs on low battery

  • inverter trips often

✔ Fix:

  • test MPPT

  • replace faulty controller

  • upgrade to high-efficiency MPPT

7️⃣ Short Circuits in the House or Office

If a socket or appliance is shorted, inverter trips for protection.

❌ Common short areas:

  • bad extension boxes

  • faulty wall sockets

  • burnt wires

  • damaged appliances

✔ Fix:

  • check all sockets

  • disconnect all appliances

  • reconnect one by one

Solarzone can trace short circuits quickly.

8️⃣ Overheating (Inverter Temperature Too High)

Inverters shut down to protect themselves when too hot.

❌ Causes:

  • inverter in small hot room

  • poor ventilation

  • blocked air vents

  • high load for long hours

✔ Fix:

  • move inverter to well-ventilated area

  • reduce load

  • clean heat vents

  • replace faulty fan

Overheating = automatic tripping.

9️⃣ Weak or Faulty AC Breakers / Fuses

If breakers are:

  • too small

  • weak

  • old

  • faulty

They will trip under load.

✔ Fix:

  • replace upgraded breakers

  • ensure correct rating

  • check wiring terminal tightness

🔟 Generator or PHCN Voltage Issues

If PHCN or generator voltage:

  • too high

  • too low

  • unstable

The inverter will trip immediately.

✔ Fix:

  • install voltage stabilizer

  • correct wiring

  • switch to ECO/Grid mode

  • use proper surge protection

Many cheap generators produce dirty voltage that triggers tripping.

11️⃣ Damaged MOSFETs, Relays, or Internal Parts

If internal components are damaged:

  • inverter may trip under even small load

  • may trip randomly

  • may show blinking lights

✔ Fix:

Solarzone repairs:
✔ relays
✔ MOSFETs
✔ capacitors
✔ transformers
✔ control boards

12️⃣ Wrong Solar Panel Wiring

Incorrect series/parallel wiring causes:
❌ input overload
❌ low voltage
❌ MPPT protection tripping

✔ Fix:

Have Solarzone inspect and correct your wiring.

When to Call Solarzone

Call Solarzone immediately if:
✔ inverter trips under small load
✔ trips when AC comes on
✔ trips when fridge starts
✔ trips during PHCN/generator changeover
✔ trips with no load connected
✔ trips after panel upgrade
✔ trips randomly

We offer:
⭐ inverter repair
⭐ battery testing
⭐ wiring correction
⭐ socket & load inspection
⭐ MPPT replacement
⭐ inverter replacement
⭐ backup increase solutions

🏁 Final Thoughts

Your inverter trips frequently because of:
✔ overload
✔ weak batteries
✔ wiring issues
✔ overheating
✔ low voltage
✔ faulty MPPT
✔ internal inverter damage

The good news?
Most inverter tripping problems can be solved within hours.

Let Solarzone Nigeria diagnose and fix your inverter issues professionally.

💥 Call to Action

⚡ Is your inverter tripping? Let Solarzone fix it today.
📞 Call/WhatsApp: 09091394722


0 ITEM
₦ 0
Loader GIF